ABSTRACT – FREEDOM FOR YOUR FEELINGS

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 84,1 x 118,9 cm (A0) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 84,1 x 118,9 cm (A0) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 84,1 x 118,9 cm (A0) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 42,0 x 59,4 cm (A2) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 21,0 x 29,7 cm (A4) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 84,1 x 118,9 cm (A0) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Produktinformation „Etter-Art-Schablonen“ Etter-Art-Schablonen: wertvolles Tool für spannende Effekte auf deinen Kunstwerken (Stencil Art) Mit Schablonen von Etter Art gestaltest du persönliche Kunst. Denn du entscheidest: Wie viel vom Schablonenmuster setzt du ein, wie oft, an welchen Stellen, in welche Richtung gedreht? Mit welchen Farbmitteln oder anderen Materialien arbeitest du – und mit welchen Methoden bringst du deine Muster aufs Kunstwerk?   Anwendungsmöglichkeiten Etter-Art-Schablonen Für große oder kleine Flächen. Als Untergrund, Hintergrund oder Highlight. Nebeneinander angewendet als gleichgestaltige Formation oder übereinander in Schichten, auch für neue Texturen. Besprayt, bemalt, betupft, bewachst … Probier dich aus!   Besonderheiten Etter-Art-Schablonen • Format: 21,0 x 29,7 cm (A4) • Verwendbar mit Sprays, Acrylfarben, Wachsen … • Zum Arbeiten mit Sprühdosen, Pinseln, Schwämmen, Händen … • Aus Mylarfolie: perfektes Material für Schablonen, Dicke: 0,25 mm • Stabiles Material, das durch Anwendung noch stabiler wird • Mit Etter-Art-Design • Hergestellt in Deutschland • Bei einigen Varianten: mit ausgestanzten Teilen; Schablonenmuster deshalb positiv und negativ möglich – oder ganz frei einsetzbar (Ausstanzungen aktuell bei folgenden Varianten: Momentum, Stones) • Mit Gebrauchsanleitung • Mit Pflegeanleitung • Wachsende Auswahl: Hier wird eine richtige Schablonenwelt entstehen, schau also immer mal wieder rein. Anwendung Etter-Art-Schablonen Schritt 1: Lege deine Schablone auf die definierte Stelle, und arbeite dann mit deinem ausgewählten Farbmittel oder Material – zum Beispiel mit einem Spray. Schritt 2: Wiederhole diesen Vorgang, so oft wie du möchtest. Deine Bildkomposition bestimmt: Wie viel Muster willst du sehen? Wo willst du das Muster sehen? In welcher Farbe oder welchen Farben willst du das Muster sehen? Tipp 1: Auch mit Schablonen kannst du Strukturen schaffen, optische und haptische. Dazu arbeitest du in Schichten. Wichtig ist, dass du jede Schicht trocknen lässt, bevor du die nächste aufbringst, damit sich nichts vermischt. Oder umgekehrt: Du willst, dass sich etwas vermischt, dann machst du sofort weiter. Haptisch fühlbar wird das Ganze, wenn du zum Beispiel mit Wachs arbeitest. Oder Farbe dicker aufträgst. Tipp 2: Bei manchen Schablonen erhältst du von uns auch die ausgestanzten Teile. Du kannst sie auf verschiedene Weise verwenden. Entweder nutzt du sie unabhängig von der eigentlichen Schablone. Oder du arbeitest mit einer Art Positiv (deine Schablone) und Negativ (die Ausstanzungen). Du siehst: Das Gestalten mit Schablonen ist alles andere als langweilig. Schablonen bieten dir nahezu unendlich viele künstlerische Freiheiten. Für genau deine Form von Kunst. Vielleicht hast du ja sogar schon einen Favoriten aus den Etter-Art-Schablonen?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 21,0 x 29,7 cm (A4) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 84,1 x 118,9 cm (A0) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 84,1 x 118,9 cm (A0) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 21,0 x 29,7 cm (A4) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 21,0 x 29,7 cm (A4) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 42,0 x 59,4 cm (A2) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 84,1 x 118,9 cm (A0) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 21,0 x 29,7 cm (A4) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?

Product information „Etter Art stencils“ Etter Art stencils: valuable tool for exciting effects on your artwork (Stencil Art) With stencils from Etter Art, you can create personalised art. Because you decide: How much of the stencil pattern do you use, how often, in which places, turned in which direction? Which colourants or other materials do you work with – and which methods do you use to apply your patterns to the artwork?   Application options for Etter Art stencils For large or small surfaces. As a ground, background or highlight. Used side by side as a uniform formation or on top of each other in layers, also for new textures. Sprayed, painted, dabbed, waxed … Try it out!   Special features Etter Art stencils • Format: 84,1 x 118,9 cm (A0) • Can be used with sprays, acrylic paints, waxes … • For working with spray cans, brushes, sponges, hammers … • Made of Mylar film: perfect material for stencils, thickness: 0.25 mm • Stable material that becomes even more stable through use • With Etter Art design • Made in Germany • With some variants: With punched-out parts; stencil patterns therefore positive and negative possible – or can be used completely freely (punched-out parts currently available for the following variants: Momentum, Stones) • With instructions for use • With care instructions • Growing selection: A real world of stencils will be created here, so check back from time to time. Applying Etter Art stencils Step 1: Place your stencil on the defined area and then work with your chosen colourant or material, for example with a spray. Step 2: Repeat this process as often as you like. Your image composition determines: How much pattern do you want to see? Where do you want to see the pattern? In which colour or colours do you want to see the pattern? Tip 1: You can also use stencils to create structures, both visual and tactile. To do this, work in layers. It is important that you allow each layer to dry before applying the next one so that nothing mixes. Or vice versa: if you want something to mix, then continue immediately. The whole thing becomes tactile when you work with wax, for example. Or apply a thicker layer of colour. Tip 2: With some templates, you will also receive the punched-out parts from us. You can use them in different ways. You can either use them independently of the actual template. Or you can work with a kind of positive (your stencil) and negative (the cut-outs). As you can see, designing with stencils is anything but boring. Stencils offer you almost infinite artistic freedom. For exactly your form of art. Maybe you already have a favourite from the Etter Art stencils?