YOUR PERFECT ACCESSORY FOR WORKING WITH RESIN!

OUR PLASTIC SPATULA That's him. Our unbreakable, flexible and acid-resistant yellow plastic spatula is ideal for working with our resin systems or our water-based hydroflow. He can. Thanks to its elasticity, the plastic spatula offers ideal conditions for working with our resin systems. It is the perfect size for use in our mixing cups. The resin can then be easily removed by bending the spatula. Particularities. • Made from unbreakable, flexible and acid-proof plastic • Versatile application possibilities • Reusable and washable • Suitable for working with resin

HEAT RESISTANT ADHESIVE TAPE FOR MAKING BACKS That's it. The adhesive tape offers extremely good adhesion even on critical substrates such as plastic, rubber and structured surfaces. Nevertheless, it can be removed easily and without leaving any residue after use. It can. Even after the resin has been cured several times, it does not stand out from the surface and is perfectly suited for repeated curing cycles. It offers good stretch and conformability, making for easy masking with excellent results. The adhesive tape offers high adhesive strength, also sticks to critical surfaces and leaves no residue on your painting surface. Particularities. • Good adaptability. • High adhesion. • Also adheres to critical substrates. • High resistance to tearing when removed. • High temperature resistance up to 110 °C. • Suitable for working with Resin.

DISPOSABLE MIXING BEAKER SCALE FOR WORKING WITH RESIN That's him. The high-quality disposable mixing cups without a lid made of polypropylene with a total volume of 650 ml are ideal for the exact mixing of paints and varnishes when working with Resin. They can. These mixing cups are perfect for mixing paints, varnishes and other media that are mixed from multiple components. They are printed with a scale up to 550 ml, which ensures precise work. A major advantage over using measuring cups is that cleaning time and the associated solvents can be saved. They also offer a cost-effective alternative if cleaning is not possible. Particularities. • Manufactured from Polypropylene. • High durability. • Stable and flexible. • Smooth and without leakage. • Stackable. • Scale with subdivisions 2:1, 3:1, 4:1, 5:1, 6:1, 7:1 and 10:1.

OUR PLASTIC SPATULA SET OF 10 That's them. Our plastic spatula set includes 10 excellent plastic spatulas for mixing your colors in resin. The spatulas can be used several times and offer a good ecological alternative to wooden sticks. They can. The plastic spatulas are ideal for mixing your colors in resin. They are elastic and can be cleaned after the hardening process. After about 24 hours, the resin can be easily and quickly removed by bending it slightly. If you are in a hurry, you can also clean them with isopropanol when they are wet. Particularities. • Made from unbreakable, flexible and acid-proof plastic. • Versatile application possibilities. • Reusable and washable. • Suitable for working with Resin.

OUR SPRAY BOTTLE FOR YOUR ART That is her. Thanks to its screw cap, our spray bottle is ideal for creating effect sprays for working in resin art. She can. Our spray bottle is made of plastic, has a screw cap and a pump sprayer that does not clog thanks to its sufficient diameter. The spray bottle is particularly suitable for non-viscous liquids and you can create effect sprays, for example with isopropanol, for your artwork. Particularities. • Easy to clean plastic. • Twist lock for easy use. • Integrated pump. • Suitable for working with Resin.

Only available in German. RESIN ART Experience, discover, experience. The Guide by Stefanie Etter Experience, what is important for working with resin: selection, UV protection, safety, materials, painting surfaces, masking, colorants and mixing - everything is explained in detail and supplemented with many tips and tricks. Discover, what possibilities the medium resin offers you: Are you taking your first steps in resin art? This manual supports and guides you to the finished work of art. Do you already have some experience with resin? Great! Browse the book and get inspiration for new great deeds. Experience, resin. Go on a great journey and create your own, very individual works of art. Whether on wood or aluminum, with luminous pigments or a crackle effect, with pastes or sprays ... Now it's your turn: Get started and become part of the wonderful resin art world! Stefanie Etter has many years of experience as an artist. With this book she passes on her knowledge and skills. But that's not all: she has also been an art lecturer for years and is therefore very close to people. From her workshops she knows the questions and problems that can arise when working with resin - and has the answers and solutions. This mixture makes the book a real resin guide, the resin guide.  

WOODEN COASTERS SET OF 4 FOR DESIGN WITH RESIN That's them. Our square or round real wood coasters are ideal as a painting surface for designing with Resin. They can. With a thickness of 0.5 cm and its high quality, arching is unthinkable. The surface of the wooden coasters is natural and should be primed with resin before processing. With a diameter of 10 cm, they offer a suitable size for your artwork. Particularities. • High quality real wood. • Round or square. • Natural. • Suitable for working with Resin.

OUR RESI-BLAST, THE CELL AND STRUCTURE MEDIUM That's it. With resi-BLAST you can create unique cells, structures and color gradients on your artwork. The tension between resi-BLAST and resin creates incredible effects on your art. It can. Resi-BLAST can be used in many different ways. The advantage is that resi-BLAST does not connect to the resin, but displaces it. This allows you to create individual and unique cells, structures and color gradients that give your artwork something fascinating. That's what it's for. Resi-BLAST is specially designed for use with resin. Displacing the resin can create different cells depending on the amount. There are no limits to your imagination when it comes to Colours. Particularities. With resi-BLAST you can create special effects in your resin art. The effects appear immediately after the drops and you can follow the process of the cells live. In addition, the cells can be subsequently edited and changed. The effects are not only visible but can also be felt haptically. Measuring, mixing and processing resi-BLAST Mix with resin 1.) Resin and hardener of MASTERCAST 1-2-1 are mixed by volume 1:1. Place the two components in a suitable mixing cup. 2.) Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 3-5 minutes; also on the bottom and edges of the mixing cup. 3.) Your mix is ready and you now have 25-30 minutes to process the resin. Now you can color the resin and add resi-BLAST. 4.) After you have dropped the resi-BLAST into your color mixture, you will immediately see that something has changed in the mixing cup. 5.) You have prepared your painting surface beforehand, which means: it is dusted, degreased and lying flat on your work surface. Now pour the color mixture with resi-BLAST onto the painting surface. 6.) You can influence the resulting effects by blow-drying the cells with a heat gun. To do this, you have to try to enlarge or change the cells in circular movements over your cells. Dripping on the artwork 1.) Resin and hardener of MASTERCAST 1-2-1 are mixed by volume 1:1. Place the two components in a suitable mixing cup. 2.) Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 3-5 minutes; also on the bottom and edges of the mixing cup. 3.) Your mix is ready and you now have 25-30 minutes to process the resin. After that it becomes too thick and begins to harden. 4.) You have prepared your painting surface beforehand, which means: it has been dusted off, degreased and is lying flat on your work surface. Now pour your color mixture onto the painting ground. 5.) In order to achieve the most spectacular results possible, you should apply at least two different colors to your painting surface. 6.) Drop the resi-BLAST on one color only to create a monochrome effect. The point in time at which you apply the resi-BLAST is also important. The ideal time is about 5 minutes after casting, as the resin then offers the right consistency. The wrong time will cause an oily layer to form on your resin surface. 7.) You can influence the resulting effects by blow-drying the cells with a heat gun. To do this, you have to try to enlarge or change the cells in circular movements over your cells.

ISOPROPANOL 99.9% FOR WORKING WITH RESIN That's it. With the help of isopropanol 99.9% you can create unique effects and structures in resin art. For this purpose, a maximum of 10% is added to the pigmented synthetic resin mixture. It can. Using isopropanol, you can create unique effects and textures by mixing it into the pigmented resin mixture. Another option is to spray straight isopropanol onto your wet resin surface. It is also ideal for cleaning fresh resin from your tools or for degreasing surfaces and painting grounds. Particularities. • To create effects and structures. • For spraying your resin surface. • For cleaning work tools. • For degreasing surfaces and painting grounds. You should pay attention to that. • Flammable. • Keep away from sources of ignition. • Do not smoke while working. • Keep tightly closed and out of the reach of children. • Avoid eye contact.  

OUR HYDROFLOW SEALER That's him. Our hydroflow sealer is an acrylic coating designed to work with our water based hydroflow. With the hydroflow sealer you can easily seal and protect the molds you have made. With the hydroflow satin sealer you achieve a gloss on your surface, while with the egg sealer you get a matt result. He can. After the hardening process of your mold, you can easily apply our hydroflow sealer and rub it on your surface with a damp cloth, brush or sponge. The hydroflow sealer has an eco-friendly acrylic formula and is made to be used with hydroflow or Aqua Cast. Particularities. • Easy to use with a spray bottle. • Eco-friendly acrylic formula. • Suitable for working with hydroflow. • Suitable for working with Aqua Cast.

NITRILE GLOVES FOR YOUR SAFETY That's them. The Safe Premium nitrile gloves are powder-free disposable gloves that are grease-resistant, oil-resistant, durable and resistant to chemicals and solvents. They can. The Safe Premium nitrile gloves are ideal for working with resin thanks to their resistance to chemicals and solvents. Their textured surface ensures a secure hold and the high haptic requirements of the gloves allow precise work. In addition, they are grease-resistant, oil-resistant, hard-wearing and highly elastic. The Safe Premium nitrile gloves are packed in a dispenser box, very comfortable and can be worn with both hands. Particularities. • Heavy nitrile, free from proteins that cause latex allergies. • Resilient. • Resistant to oil and grease. • Resistant to chemicals and solvents. • High tactile demands for precise work. • Usable on both sides. • Rolled edge for quick release. • Suitable for working with Resin.

THE ETTER ART SILICONE MOLDS IN 8 DIFFERENT VERSIONS That's them. Our Etter Art silicone molds in 8 different designs are high-quality silicone molds that are produced in-house with our PREMIUM SILICONE SOFT ROSÉ 22. They can. The Etter Art silicone molds are ideal for filling with resin, concrete, hydroflow or similar. There are no limits to your design. You can work with colors but also haptic objects and integrate them into your form. Particularities. • Own production. • True to detail, sophisticated, hard-wearing and elastic. • Suitable for making coasters, trays, candle holders, baking tins and more. • Solvent-free. • Food quality. • Non-corrosive. • Non-flammable. • Not harmful in contact with Skin. You should pay attention to that. To increase the durability of the molds, you should not work with pointed objects or excessive heat. The molds should not be stored on the reverse side, otherwise the sub-floor can bulge upwards. Rinse with clear water before use, dust off, degrease and place flat on the work surface. Your forms. • Square • Circular • Circular with scalloped edges • Hexagon • Soap Dish • Triangle (Small/Big) • Geode

Stefanies Schürze – dein Atelier-Begleiter mit Stil Kunst ist kein sauberes Hobby. Es darf tropfen, spritzen, kleckern – auf dem Malgrund. Nicht auf deiner Kleidung. Stefanies Schürze ist dein verlässlicher Begleiter bei allen kreativen Eskapaden: schlicht im Design, stark im Schutz, bequem im Sitz – und natürlich mit Etter-Art-Logo, damit gleich klar ist, woher der gute Stil kommt. Ideal für alles, was Spuren hinterlässt – außer auf dir Ob Resin oder Pigmente, Strukturpasten oder Kaffee – Stefanies Schürze schützt dich zuverlässig vor dem kreativen Chaos. Und das Beste: Du siehst dabei auch noch verdammt gut aus. Was Stefanies Schürze besonders macht Tiefschwarz und zeitlos schlicht – passt zu allem 100 % Polyester – strapazierfähig und pflegeleicht Unisex-Schnitt mit verstellbarem Nackenband Zwei geräumige Taschen – für alles, was du beim Arbeiten gern griffbereit hast: Pinsel, Spachtel oder dein Handy Waschbar bei 40 °C im Feinwaschgang Mit Etter-Art-Logo – direkt bei Stefanie im Atelier per Hand aufgedruckt Und das Beste: von Stefanie selbst getestet. Und für absolut schürzenwürdig befunden Tipp: Je mehr Farbkleckse auf deiner Schürze, desto schöner wird sie. Stefanies Schürze – weil dein Outfit nicht mitmalen muss.