THE PRODUCT ULTRACAST XT

That's it.

Are you talking about large areas or formats? Surfaces that need to be particularly heat-resistant? Then work with ULTRACAST XT. We developed this resin system specifically for such needs. ULTRACAST XT is an ASTM certified two-component resin and is of very high quality. You can use ULTRACAST XT easily and safely and create impressive, high-gloss works.

It can.

ULTRACAST XT becomes a hard and glassy varnish when its two individual components are mixed. It also offers the best possible protection against yellowing. So-called UV stabilizers ensure this: Our products contain a UV absorber and HALS (Hindered Amine Light Stabilizer).

That's what it's for.

Think big! ULTRACAST XT is the right resin for you when it comes to large formats and surfaces. These include, for example, large-format painting surfaces, tables, counters, kitchen worktops or floors.

ULTRACAST XT is ideal for finishing, in mixed media applications or for pouring. This resin system is also a good choice for surfaces that need to be heat-resistant.

Particularities.

In order for ULTRACAST XT to do justice to large areas, it has a particularly long processing time: you have up to 80 minutes to work and design. It is also heat resistant up to 80-90°C.

Measure, mix and apply ULTRACAST XT

1. ULTRACAST XT resin and hardener are mixed by volume 2:1. Place the two components in a suitable mixing cup.

2. Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 3-5 minutes; also on the bottom and edges of the mixing cup.

3. Your mix is ??ready and you now have 60-80 minutes to process the resin. After that it becomes too thick and begins to harden.

4. You have previously prepared your painting surface, which means: it is dusted, degreased and lying flat on your work surface. Now pour the synthetic resin mixture onto the painting surface. Resin is self-leveling and will spread itself over a smooth, flat surface. but you are welcome to help with a spatula.

5. ULTRACAST XT is a high quality product that produces little, if any, blisters. If bubbles appear, simply remove them with the heat of a Bunsen burner or a heat gun. To do this, move about 10 cm away from the resin surface in swinging movements.

6. Protect your work from dust or other foreign objects by working in an environment that is as dust-free as possible. Cover it when it's done.

7. The hardened surface is best cleaned with a damp Cloth.

You should pay attention to this:

Although our resins are formulated with the most advanced and safest epoxy chemistry available, you should handle all epoxy resins responsibly and be proactive about your safety:

• Always wear nitrile gloves.

• When sanding cured resin, wear a dust mask, and better yet, wear safety goggles.

• It is advisable to work in a well-ventilated area and to wear a Respirator.

• Avoid skin contact (if resin gets on skin, wash with plenty of soap and water).

• DO NOT eat, drink or smoke while working.

• If eyes get dirty, wash with plenty of water for 15 minutes and seek medical attention immediately.

• Adding inks/varnishes/mica powder/glitter to epoxy changes its properties and may reduce its non-toxicity. If using alcohol inks, DO NOT use a flame to remove bubbles as alcohol is flammable.

You can find more technical information about the Eli-Chem-Resin ULTRCAST XT in our overview table.

ULTRACAST XT is available in the following sizes: 1.5 kg, 3 kg, 7.5 kg, 15 kg